- Each /8 block contains 2 24 = 16,777,216 addresses. As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University, formerly using 36.0.0.0/8, have returned their allocated blocks (in this case to APNIC ) to assist in the delay of the exhaustion date.
- Compute answers using Wolfram's breakthrough technology & knowledgebase, relied on by millions of students & professionals. For math, science, nutrition, history.
- BlocLoc 1.875' x 3.75' Flying Geese Square Up Ruler BlocLoc #BL-FG1875 Ruler size: 2.375' x 4.25' Finished block size: 1.875' x 3.75' Price: $21.48 Sale: $21.48 each.
EBay Bloc LocHalf Square Triangle Ruler Set #1-1.5',2.5',3.5',4.5',5.5', 6.5', Acrylic Ruler PRODUCT DESCRIPTION Bloc Loc's half square triangle rulers make the tough job of squaring up easy and fast. The groove slides along the seam to trim smaller units and allows quilters to.
Glass Block Sizes and Dimensions
The outcome of your glass block project is just as important to us as it is to you. Should you require any assistance in designing or laying out your glass block project, feel free to give us a call.
For Builders, Contractors and Architects, Sizing is everything. Failure to get the product sized or layed out correctly, that could mean failure. At Quality Glass Block, we do our best to help you avoid those issues, right from the planning stages to the end of your project. https://dzsmcp.over-blog.com/2021/01/music-analysis-software-free.html. Our Glass Block Sizes chart below will help you determine the glass block dimensions that are available from Quality Glass Block. Keep in mind that not all of the glass block sizes are listed on this page. If you should need any glass block dimensions for specialty projects, please feel free to contact us at 815.416.1007.
To buy your glass block online after viewing the glass block sizes and dimensions chart, please click here.
| Glass Block Types and Patterns U.S. Sizing | Nominal Glass Block Sizes | Exact Glass Block Sizes |
| High Performance Glass Block | ||
| Thickset 60 Clarity, Nubio and Spray | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Thickset 90 Clarity, Nubio and Endura | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| 6' X 6' X 4' Clarity Only | 5 3/4' X 5 3/4' X 3 7/8' | |
| Vistabrik Solid Glass Block | 8' x 8' X 3' | 7 3/4' X 7 3/4' X 3' |
| Vistabrik Stippled Glass Block | 8' x 8' X 3' | 7 3/4' X 7 3/4' X 3' |
| Energy Efficiten Glass Block | ||
| Clarity | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| Nubio | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| Three Inch Nominal Glass Block U.S. Sizing | Nominal Glass Block Sizes | Exact Glass Block Sizes |
| Atkis | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| Alpha | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| Clarity | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| 6' X 8' X 3' | 5 3/4' X 7 3/4' X 3 1/8' | |
| 4' X 8' X 3' | 3 3/4' X 7 3/4' X 3 1/8' | |
| 6' X 6' X 3' | 5 3/4' X 5 3/4' X 3 1/8' | |
| Diamond DM | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| 6' X 8' X 3' | 5 3/4' X 7 3/4' X 3 1/8' | |
| 4' X 8' X 3' | 3 3/4' X 7 3/4' X 3 1/8' | |
| 6' X 6' X 3' | 5 3/4' X 5 3/4' X 3 1/8' | |
| Ice | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| 6' X 8' X 3' | 5 3/4' X 7 3/4' X 3 1/8' | |
| 4' X 8' X 3' | 3 3/4' X 7 3/4' X 3 1/8' | |
| 6' X 6' X 3' | 5 3/4' X 5 3/4' X 3 1/8' | |
| Nubio | 8' X 8' X 3' | 7 3/4' X 7 3/4' X 3 1/8' |
| 6' X 8' X 3' | 5 3/4' X 7 3/4' X 3 1/8' | |
| 4' X 8' X 3' | 3 3/4' X 7 3/4' X 3 1/8' | |
| 6' X 6' X 3' | 5 3/4' X 5 3/4' X 3 1/8' | |
| Three Inch Nominal Glass Block Metric Sizing | Nominal Glass Block Sizes | Exact Glass Block Sizes |
| Alpha | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Arctic | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Clearview | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Cross Large | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Cross Small | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Cuneis | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Deco | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Digona | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Inca | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Lozenge | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Marina | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Maya | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Midarc | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Optical | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Paralline | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Pyramid | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Samba | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Savona | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Sponge | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Stella | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Four Inch Nominal Glass Block U.S. Sizing | Nominal Glass Block Sizes | Exact Glass Block Sizes |
| 8' X 8' X 4' | ||
| Alpha | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Arctic | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Clarity | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| 6' X 8' X 4' | 5 3/4' X 7 3/4' X 3 7/8' | |
| 4' X 8' X 4' | 3 3/4' X 7 3/4' X 3 7/8' | |
| 6' X 6' X 4' | 5 3/4' X 5 3/4' X 3 7/8' | |
| Cortina | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| 6' X 8' X 4' | 5 3/4' X 7 3/4' X 3 7/8' | |
| 4' X 8' X 4' | 3 3/4' X 7 3/4' X 3 7/8' | |
| 6' X 6' X 4' | 5 3/4' X 5 3/4' X 3 7/8' | |
| Cross Ribbed | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Light Diffusing | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Nubio | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| 6' X 8' X 4' | 5 3/4' X 7 3/4' X 3 7/8' | |
| 4' X 8' X 4' | 3 3/4' X 7 3/4' X 3 7/8' | |
| 6' X 6' X 4' | 5 3/4' X 5 3/4' X 3 7/8' | |
| Regent | 8' X 8' X 4' | 7 3/4' X 7 3/4' X 3 7/8' |
| Color Block Types and Patterns Metric Sizes | Nominal Sizes | Exact Sizes |
| Basic Series Color Glass Block Full Bodied | ||
| Non-Metalized | ||
| Azure Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Blue Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Brown Basic wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Green Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Grey Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Pink Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Turquoise Basic Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Pegasus Series Color Glass Block Full Bodied | ||
| Non-Metalized Pegasus | ||
| Aqua Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Aqua Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Blue Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Blue Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Clear Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Clear Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Nordica Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Nordica Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Rosa Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Rosa Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Sienna Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Sienna Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Turquoise Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Turquoise Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Verde Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Verde Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Metalized Pegasus | ||
| Aqua Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Blue Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Clear Smooth | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Clear Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Green Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| 3 1/2' X 7 1/2' X 3' | 3 1/2' X 7 1/2' X 3 1/8' | |
| Nordica Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Pink Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Sienna Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Turquoise Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Basic Series Color Inected Glass Block | ||
| Non-Metalized | ||
| Blue Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Blue Brilly Wave 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Bronze Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Emerald Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Orange Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Red Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Red Brilly Wave 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Ruby Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Turquoise Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Violet Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| White Brilly Clear 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Yellow Brilly Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Yellow Brilly Wave 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Pegasus Series Color Injected Glass Block | ||
| Metalized | ||
| Ardesia Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Avoria Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Bianco Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Cedro Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Cobalto Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Indaco Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Kiwi Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Magenta Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Malva Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Muschio Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Nero Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Ocra Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Oro Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Scarlatto Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Smeraldo Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Tortora Wave | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Mendini Series Color Injected Glass Block | ||
| Metalized | ||
| Agata | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Ambra | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Ametista | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Berillo | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Black 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Black 30 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Citrino | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Corallo | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Giada | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Malachite | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Rubino | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Topazio | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Tormalina | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| White 100 | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Zaffiro | 7 1/2' X 7 1/2' X 3' | 7 1/2' X 7 1/2' X 3 1/8' |
| Vetropieno Series Glass Block | ||
| Blue Vetropieno | 9 1/4' X 2 1/8' X 4 1/2' | 9 1/4' X 2 1/8' X 4 1/2' |
| 4 5/8' X 2 1/8' X 4 1/2' | 4 5/8' X 2 1/8' X 4 1/2' | |
| Clear Vetropieno | 9 1/4' X 2 1/8' X 4 1/2' | 9 1/4' X 2 1/8' X 4 1/2' |
| 4 5/8' X 2 1/8' X 4 1/2' | 4 5/8' X 2 1/8' X 4 1/2' | |
| Nordica Vetropieno | 9 1/4' X 2 1/8' X 4 1/2' | 9 1/4' X 2 1/8' X 4 1/2' |
| 4 5/8' X 2 1/8' X 4 1/2' | 4 5/8' X 2 1/8' X 4 1/2' | |
| Siena Vetropieno | 9 1/4' X 2 1/8' X 4 1/2' | 9 1/4' X 2 1/8' X 4 1/2' |
| 4 5/8' X 2 1/8' X 4 1/2' | 4 5/8' X 2 1/8' X 4 1/2' |
For Assistance, feel free to give our Glass Block specialists a call in help determining the correct glass block for your project
Description
M-Bloc® IR Type X interior gypsum panels were designed and tested to not only provide exceptional resistance to mold and moisture, but superior resistance to impact penetration, abrasion, abuse and indention when compared to traditional wallboard. This Type X panel consist of an impact, abuse defiant core encased in heavy abrasion, mold and moisture resistant blue face paper and brown back paper manufactured from 100% recycled paper, with a fiberglass mesh fabric embedded into the core adjacent to the back of the panel to provide additional impact and penetration resistance. At an independent laboratory accredited in accordance with ISO 17025-2005, M-Bloc panels have been tested to the industry's most rigorous standard achieving the best possible results per ASTM D3273, scoring a perfect 10 thus minimizing the risk of mold and mildew growth.
Basic Uses
M-Bloc IR Type X interior gypsum panels are recommended for commercial and institutional construction where greater resistance to impact, abrasion, abuse and indentation are required. These UL classified panels are allowed for use in any fire rated design where American Gypsum's 5/8' Type X wallboard is approved. Additionally M-Bloc IR Type X panels can be used as a base for the adhesive application of ceramic or plastic tile in limited wet areas, e.g., bathrooms, kitchens, laundry, and utility rooms.
- Abrasion Resistance: Level 3
- Indentation Resistance: Level 1
- Soft Body Impact Resistance: Level 3
- Hard Body Impact Resistance: Level 3
Greenguard
Shaft liner gypsum wallboard has attained the GREENGUARD Indoor Air Quality Certified status and GREENGUARD Children & Schools Indoor Air Quality Certified status. For more information click on the link at right.
Product Data
Sizes
| Thickness | Widths | Lengths | Edge Types |
|---|---|---|---|
| 5/8' (15.9mm) | 4' (1219mm) | 8' (2438mm) | Tapered |
| 5/8' (15.9mm) | 4' (1219mm) | 10' (3048mm) | Tapered |
| 5/8' (15.9mm) | 4' (1219mm) | 12' (3658mm) | Tapered |
Special lengths or edges may be available on special order. Consult your American Gypsum sales representative for details.
Thermal Resistance 'R' Value 5/8' = 0.61
Technical Data
Storage and Handling
Installation - M-Bloc IR Type X shall be installed in accordance with the recent editions of 'Application and Finishing of Gypsum Panel Products' (GA-216) and or 'Standard Specification for Application and Finishing of Gypsum Board' (ASTM C 840).
The building temperature shall be maintained at not less than 50ºF (10ºC) for adhesive application of gypsum board, during joint treatment, texturing, and decoration. When a temporary heat source is used the temperature shall not be more than 95°F (35°) in any given room or area. Adequate and continuous ventilation shall be provided in the working area during the installation and the drying or curing period.
The listed impact penetration/abrasion/abuse/indention ratings apply to walls constructed with M-Bloc IR Type X gypsum wallboard installed vertically to minimum 20 gauge framing members spaced a maximum of 16' o/c.
Blocs 3 2 4 X 8 7
The design professional has the ultimate responsibility for location of control joints.
Blocs 3 2 4 X 8
Decoration - The design professional, contractor and or owner shall review 'Recommended Levels of Gypsum Board Finish' (GA-214), in order to specify the proper level of drywall finishing needed to assure the desired results. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. To equalize the porosities between the face paper and joint compound and improve fastener and joint concealment, the surface shall be primed and sealed with a full-bodied high solids drywall primer before texturing or final decoration. The selection of the proper paint to give the specified or desired finished characteristics is the responsibility of the design professional, contractor and or owner.
Applicable Standards
| Mold Resistance | Score of 10 (ASTM D 3273) |
|---|---|
| Manufacturing | ASTM C 1396 Federal Specification - SS-L-30D Type III Grade X |
| Abrasion Resistance | Level 3 |
| Indentation Resistance | Level 1 |
| Soft Body Impact Resistance | Level 3 |
| Hard Body Impact Resistance | Level 3 |
| Surface Burning Characteristics | ASTM E 84 Wirecast 7 3 – stream live from the desktop. Flame Spread - 0 https://saigafenri1980.mystrikingly.com/blog/google-chrome-free-download-latest-version-for-windows-xp-sp3. Smoke Developed - 0 https://mluy.over-blog.com/2021/01/microsoft-for-mac-apple-store.html. |
Blocs 3 2 4 X 8 Plywood
Fire Resistance Ratings
LEED
LEED Contributions
Blocs 3 2 4 X 8 Drywall
Installation - M-Bloc IR Type X shall be installed in accordance with the recent editions of 'Application and Finishing of Gypsum Panel Products' (GA-216) and or 'Standard Specification for Application and Finishing of Gypsum Board' (ASTM C 840).
The building temperature shall be maintained at not less than 50ºF (10ºC) for adhesive application of gypsum board, during joint treatment, texturing, and decoration. When a temporary heat source is used the temperature shall not be more than 95°F (35°) in any given room or area. Adequate and continuous ventilation shall be provided in the working area during the installation and the drying or curing period.
The listed impact penetration/abrasion/abuse/indention ratings apply to walls constructed with M-Bloc IR Type X gypsum wallboard installed vertically to minimum 20 gauge framing members spaced a maximum of 16' o/c.
Blocs 3 2 4 X 8 7
The design professional has the ultimate responsibility for location of control joints.
Blocs 3 2 4 X 8
Decoration - The design professional, contractor and or owner shall review 'Recommended Levels of Gypsum Board Finish' (GA-214), in order to specify the proper level of drywall finishing needed to assure the desired results. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. To equalize the porosities between the face paper and joint compound and improve fastener and joint concealment, the surface shall be primed and sealed with a full-bodied high solids drywall primer before texturing or final decoration. The selection of the proper paint to give the specified or desired finished characteristics is the responsibility of the design professional, contractor and or owner.
Applicable Standards
| Mold Resistance | Score of 10 (ASTM D 3273) |
|---|---|
| Manufacturing | ASTM C 1396 Federal Specification - SS-L-30D Type III Grade X |
| Abrasion Resistance | Level 3 |
| Indentation Resistance | Level 1 |
| Soft Body Impact Resistance | Level 3 |
| Hard Body Impact Resistance | Level 3 |
| Surface Burning Characteristics | ASTM E 84 Wirecast 7 3 – stream live from the desktop. Flame Spread - 0 https://saigafenri1980.mystrikingly.com/blog/google-chrome-free-download-latest-version-for-windows-xp-sp3. Smoke Developed - 0 https://mluy.over-blog.com/2021/01/microsoft-for-mac-apple-store.html. |
Blocs 3 2 4 X 8 Plywood
Fire Resistance Ratings
LEED
LEED Contributions
Blocs 3 2 4 X 8 Drywall
Our products can contribute to the following credits within the Materials and Resources (MR) category.
- LEED MR Credit 2: Construction Waste Management
- LEED MR Credit 4: Recycled Content
- LEED MR Credit 5: Regional Materials
Microsoft windows software download. Our products can contribute to the following credit within the Indoor Environmental Quality (IEQ) category.
- LEED IEQ Credit 4.6: Low-Emitting Materials - Ceiling and Wall Systems (SCHOOLS ONLY)
To learn more please click the LEED link at right.
Related Links:
